· Ford Motor (China) Co., Ltd. recalled some imported F-150 Raptor series cars

Recently, Ford Motor (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall part of the imports from March 12, 2014 to December 31, 2016, starting from February 28, 2018. 2017 F-150 Raptor series car. According to the company's statistics, there are 363 vehicles in mainland China.

Due to manufacturing reasons, some of the vehicles in this recall may have water seepage conditions. In low temperature environment, the side door latch will freeze, which may cause the locking mechanism to become stuck after the door is opened. In addition, some of the vehicles may be twisted due to improper installation, which may also cause the door bolts to become stuck. In some cases, the latching of the door bolt caused by the above reasons, under the combined action of the friction between the latch latch and the resistance of the door seal strip, will result in the door being unable to be properly locked, posing a safety hazard.

Ford Motor (China) Co., Ltd. will install a waterproof shield and check the bolt pull wire for the vehicle door bolts in the recall range, and carry out corresponding repair according to the inspection results to eliminate the defects. Stock vehicles will be sold after missing defects.

If the relevant user finds that the door is difficult to open or it is difficult to lock the door when the door is closed, or the door pops up when trying to close the door many times, or if it takes several efforts to lock the door bolt, contact the authorized dealer in time to carry out the vehicle. Related checks. The user should contact the dealer for repair as soon as possible after the recall operation begins.

Ford Motor (China) Co., Ltd. will notify customers by registered mail. Users can obtain information about this recall by calling Ford Motor (China) Co., Ltd. Hotline 800-810-0740. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.

PTFE Materials

PTFE Materials,Modified PTFE,PTFE Tube Or Seal,Glass Filled PTFE

Liaoning Huari New Materials Co., Ltd. , https://www.ptfebush.com